Moved: handover implementation

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #8627
    LUCIEN WENGIE YEMAH
    Participant

    Hello everyone, am trying to simulate the load balancing algorithm parameters below with graphs plotted.

    my main problem is writing the code for the handover parameters below,
    Handover execution time 250ms
    Maximum HOoff 9dB
    Handover Time-to-trigger 320ms
    βi adjustment step-size θ 0.1

    HOW SHOULD I GO ABOUT IT???
    Please help me, am really new to the simulator and i’ve gone through the documentation and found no section for handover implementation.

    thanks in anticipation……………

    Parameter Value
    Subcarrier and Total band Subcarrier: 15K Hz; Total: 10MHz
    Resource Blocks (RB) Total 50 RB (12 subcarriers per RB)
    Frequency 2GHz
    Inter-site distance 500m, 19 sites with 57 cells
    Log-normal shadow fading Standard Deviation: 8dB
    Downlink path-loss model 37.6 lg (r) + 128.1, r-km
    Antenna pattern berger
    Antenna gain 14dBi
    Total BS transmission power 43dBm
    User mobility Speed 4m/s, random direction
    User model & Scheduling Constant Rate, Users Poisson arrive & Max C/I
    Handover execution time 250ms
    Maximum HOoff 9dB
    Handover Time-to-trigger 320ms
    βi adjustment step-size θ 0.1

    #8661

    (this was moved and made into a new topic – please make sure to only post in topics that fit to your question)

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.